Hot Racing light weight hardened steel 54 tooth, 32 pitch (0.8 Mod)
spur gear for the 1/10 Traxxas Bandit, Rustler, 2WD Slash, 2WD Stampede,
and Telluride vehicles.
Comes with the following:
- One (1) 54 tooth 32 pitch (0.8 Mod) spur gear
- Three (3) mounting screws
- Three (3) green anodized countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to
prevent screw ends from protruding too far through spur backing plate)
- Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting
- Motor should no way exceed 180F. ESC should not exceed 160F. Excessive
temperatures will shorten the life of the motor and ESC.
ALUM STEERING BLOCKS ECX
Hot Racing Aluminum Hex Slipper Clutch Pads, for Arrma 1/10
Hot Racing Aluminum Rear Body Mount Support, for Axial SCX24
Copyright 2021 Hiawatha Hobbies All Rights Reserved.